For people with a site as well as an app, speed is critical. The faster your website works and then the faster your apps work, the better for you. Because a website is simply an assortment of files that connect to each other, the systems that store and work with these files have a huge role in site general performance.

Hard drives, or HDDs, were, right up until the past several years, the most trustworthy products for storing information. However, lately solid–state drives, or SSDs, are actually gaining interest. Check out our comparability chart to see if HDDs or SSDs are better for you.

1. Access Time

Image

SSD drives offer a fresh & progressive solution to data storage according to the utilization of electronic interfaces rather than any sort of moving parts and turning disks. This brand–new technology is faster, making it possible for a 0.1 millisecond data access time.

Image

HDD drives still make use of the very same basic data access concept which was actually developed in the 1950s. Although it has been noticeably enhanced since that time, it’s slower as compared with what SSDs are offering to you. HDD drives’ file access speed ranges in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is important for the overall performance of a data file storage device. We have run thorough trials and have confirmed that an SSD can manage at the very least 6000 IO’s per second.

Image

Over the exact same tests, the HDD drives demonstrated to be much slower, with 400 IO operations maintained per second. While this may appear to be a good deal, for those who have a busy server that serves a great deal of popular web sites, a slow hard disk drive could lead to slow–loading web sites.

3. Reliability

Image

SSD drives are made to include as fewer rotating components as is possible. They use an identical concept like the one employed in flash drives and are generally significantly more trustworthy when compared to traditional HDD drives.

SSDs provide an typical failing rate of 0.5%.

Image

HDD drives make use of spinning disks for storing and reading info – a technology dating back to the 1950s. And with hard disks magnetically hanging in the air, rotating at 7200 rpm, the chances of something failing are much higher.

The average rate of failing of HDD drives varies between 2% and 5%.

4. Energy Conservation

Image

SSD drives are considerably small compared to HDD drives and they do not have virtually any moving components whatsoever. It means that they don’t produce as much heat and require a lot less electricity to function and much less energy for cooling down purposes.

SSDs use up amongst 2 and 5 watts.

Image

HDD drives are famous for getting loud. They need further electrical power for chilling reasons. On a server that has lots of HDDs running constantly, you will need a lot of fans to ensure that they’re kept cool – this may cause them a lot less energy–effective than SSD drives.

HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

Image

SSD drives enable faster file accessibility rates, which will, subsequently, allow the CPU to accomplish file calls considerably faster and then to go back to additional duties.

The common I/O hold out for SSD drives is barely 1%.

Image

Compared with SSDs, HDDs permit slower file accessibility rates. The CPU must await the HDD to return the required data, scheduling its resources meanwhile.

The average I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

In real life, SSDs conduct as admirably as they managed for the duration of the tests. We competed an entire system backup using one of the production web servers. Over the backup process, the normal service time for I/O calls was under 20 ms.

Image

With the same web server, but this time built with HDDs, the end results were completely different. The common service time for an I/O query fluctuated between 400 and 500 ms.

7. Backup Rates

Image

Speaking about backups and SSDs – we have found a fantastic enhancement with the backup speed as we transferred to SSDs. Right now, a normal hosting server backup takes solely 6 hours.

Image

Alternatively, on a hosting server with HDD drives, the same back up may take three to four times as long to finish. A full back–up of an HDD–equipped web server may take 20 to 24 hours.

Should you want to straight away boost the efficiency of your sites without needing to alter any code, an SSD–powered website hosting solution is really a very good alternative. Check out Zona Informatica’s hosting packages packages and then our Linux VPS – these hosting services feature swift SSD drives and are offered at the best prices.

  • Service guarantees

  •  
  • Our Virtual Private Servers include no installation costs and work in a steady network offering 99.9% of uptime. Full root access warranted.

  • Compare our prices

  •  
  • Examine the tools and characteristics offered by Zona Informatica’s Virtual Private Servers. You can start off with a cheaper VPS server and upgrade with just a click of the mouse as your requirements grow.
  • Compare our hosting plans

  • Contact Us

  •  
  • You are able to get in contact with us round the clock by email or by using our ultra–fast ticketing platform. We offer a 1–hour response time guarantee.